Specification
| Kinematic viscosity at 100˚С, mm²/s | 14,5 |
| Density at 20˚С, kg/m³ | 887 |
| Viscosity index | 91 |
| Flash point in an open crucible, ˚С | 248 |
| Solidification temperature, ˚С | -18 |
| Acid value, grams of KOH per gram of oil | 5,4 |
| Sulfated ash content,% | 1 |
| Mass fraction of active elements, %: calcium, not less than; zinc, within the limits of; phosphorus, not more | 0,24; 0,05; 0,04 |
Advantages:
neutralizes acids formed as a result of operation;
engine corrosion protection;
good detergent, antioxidant, extreme pressure and antiwear properties;
Description
Motor oil M-14V2 is intended for lubrication of two- and four-stroke diesel locomotive, trunk-type marine diesel engines, medium-powered naturally aspirated auto-tractor engines, diesel generators, pumping units operating at increased loads on distillate diesel fuels with a sulfur content of up to 0.5%.
Motor oil M-14V2 is obtained by mixing distillate and residual components produced from sour or low-sulphur oils, with a composition of additives.