Product Code: SAE 10W-40 S Synth, API CI-4/SL
Specifications: SAE 10W-40 S Synth, API CI-4/SL
Match: ACEA E7/E6; MB 228.51
Specification
| Kinematic viscosity at 100˚С, mm²/s | 14,1 |
| Density at 20˚С, kg/m³ | 882 |
| Viscosity index | 142 |
| Flash point in an open crucible, ˚С | 217 |
| Solidification temperature, ˚С | -35 |
| Acid value, grams of KOH per gram of oil | 10,5 |
| Sulfated ash content,% | 1,2 |
| Mass fraction of active elements, %: calcium, not less than; zinc, within the limits of; phosphorus, not more | 0,12 |
| Evaporation losses according to Noack, %, not more | 13 |
Advantages:
Reliable start of the engine in frost due to the high pumpability of the oil at negative temperatures
High reserve of operational properties and it is stable during extended service intervals
The increased indicator of thermal oxidation stability contributes to the unchanged characteristics of the oil during the entire period of operation
Compatibility with all engine seals
Description
AVEX VILTON 10W-40 semi-synthetic oil is produced from high-quality base oil enriched with a number of effective additives. This combination allows you to achieve higher operational characteristics: prolonging the time of product use, minimizing evaporation waste, good compatibility with systems for reducing the level of toxicity of exhaust gases (SCR, EGR). It is intended for use in highly loaded diesel engines of trucks, buses, tractors, minibuses, construction and agricultural machinery. It is recommended for all-season operation in modern diesel engines with and without turbocharging, operating in severe conditions.